改性胺微胶囊固化剂制备工艺的优化与性能

以改性胺1618固化剂为囊芯、脲醛树脂为壁材单体,采用界面聚合技术,成功制备了一种新型聚脲改性胺微胶囊固化剂。通过正交设计试验,考察了芯壁质量比、乳化剂种类和质量分数及搅拌速率对微胶囊包覆率、粒径大小及分布情况的影响,并确定了最佳制备工艺条件。采用马尔文激光粒度仪、扫描电镜对微胶囊粒径大小、分布情况及表面形貌进行表征,采用热重分析仪及傅里叶变换红外光谱对其化学结构进行表征,通过拉伸试验对自修复材料的断裂力学性能进行研究。结果表明,该微胶囊含有固化剂芯材,其热稳定温度为198°C,当芯壁质量比为0.7∶1、乳化剂为阿拉伯胶、乳化剂质量分数为1.5%、搅拌速率为800r/min时,所制备的微胶囊包覆率达到79.8%,平均粒径为207.5nm,呈规则的球形,分散性及表面致密性好。当基体材料中加入质量分数为1%的微胶囊后,拉伸强度提高64%,弹性模量提高287%。     

Controlling supramolecular polymerization through multicomponent self‐assembly

The self‐assembly into supramolecular polymers is a process driven by reversible non‐covalent interactions between monomers, and gives access to materials applications incorporating mechanical, biological, optical or electronic functionalities. Compared to the achievements in precision polymer synthesis via living and controlled covalent polymerization processes, supramolecular chemists have only just learned how to developed strategies that allow similar control over polymer length, (co)monomer sequence and morphology (random, alternating or blocked ordering). This highlight article discusses the unique opportunities that arise when coassembling multicomponent supramolecular polymers, and focusses on four strategies in order to control the polymer architecture, size, stability and its stimuli‐responsive properties: (1) end‐capping of supramolecular polymers, (2) biomimetic templated polymerization, (3) controlled selectivity and reactivity in supramolecular copolymerization, and (4) living supramolecular polymerization. In contrast to the traditional focus on equilibrium systems, our emphasis is also on the manipulation of self‐assembly kinetics of synthetic supramolecular systems. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 34–78     

同轴电喷法制备PCL-蛋清体系复合微胶囊

以鸡蛋的卵清蛋白作为蛋白质药物模板、生物可降解材料聚己内酯(PCL)为药物载体模板,采用同轴电喷法制备PCL-蛋清体系的复合微球.研究了电导率、黏度对于电喷微球成型的影响.核壳溶液推进速率比、电压、溶液质量分数和接收距离等对于所得微球表面形态和结构的影响.利用扫描电子显微镜(SEM)研究了微球的表面形态,用荧光显微镜表征了微球的包覆模式.结果表明:同轴电喷法可以制备PCL-蛋清体系的复合结构微胶囊,其中推进速率比对微球形貌、粒径及其分布的影响比较明显,当PCL与蛋清溶液推进速率比大于10时,将出现具有包覆结构的微球.     

One‐pot synthesis of hyperbranched glycopolymers by RAFT polymerization

Soluble hyperbranched glycopolymers were prepared by copolymerization of glycan monomers with reversible addition‐fragmentation chain transfer polymerization (RAFT) inimers in a simple one‐pot reaction. Two novel RAFT inimers, 2‐(methacryloyloxy)ethyl 4‐cyano‐4‐(phenylcarbonothioylthio)pentanoate (MAE‐CPP) and 2‐(3‐(benzylthiocarbonothioylthio)propanoyloxy)ethyl acrylate (BCP‐EA) were synthesized and used to prepare hyperbranched glycopolymers. Two types of galactose‐based saccharide monomers, 6‐O‐methacryloyl‐1,2:3,4‐di‐O‐isopropylidene‐D ‐galactopyranose (proGal‐M) and 6‐O‐(2′‐acrylamido‐2′‐methylpropanoate)‐1,2:3,4‐di‐O‐isopropylidene‐D ‐galactopyranose (proGal‐A), containing a methacrylate and an acrylamide group, respectively, were also synthesized and polymerized under the mediation of the MAE‐CPP and BCP‐EA inimers, respectively. In addition, hyperbranched poly(proGal‐M), linear poly(proGal‐A), and hyperbranched poly(proGal‐A) were generated and their polymerization kinetics were studied and compared. An unexpected difference was observed in the kinetics between the two monomers during polymerization: the relationship between polymerization rate and concentration of inimer was totally opposite in the two monomer–inimer systems. Branching analysis was conducted by using degree of branching (DB) as the measurement parameter. As expected, a higher DB occurred with increased inimer content. Furthermore, these polymers were readily deprotected by hydrolysis in trifluoroacetic acid solution resulting in water‐soluble polymers. The resulting branched glycopolymers have potential as biomimetics of polysaccharides. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Dioxygen oxidation of hydrocarbons by a methane monooxygenase-like system: diiron complex-O_2-Zn/HOAc-MV~(2 )

The activation of dioxygen and incorporation into hydrocarbons have been achieved under mild conditions by a methane monooxygenase (MMO)-like system using a dinuclear iron complex [Fe_2Dhist(OAc)_2]BPh_4·3H_2O as the model complex, zinc powder as the electron donor, HOAc as the proton source and methylviologen as the electron transfer agent. The results show that styrene is oxygenated predominantly to styrene oxide (1 396 mol/100 mol of the Fe_2 complex), benzaldehyde (16160) and acetophenone (986), and cyclohexane to cyclohexanol (9370) and cyclohexanone (2670). EPR studies indicate that the hypervalent ironoxo spiecs Fe~ⅣFe~Ⅳ(?)O, derived from Fe~ⅢFe~Ⅲ core via reduction, O_2-binding and protonation, is the active intermediate which inserts the activated oxygen atom into C(?)C or C—H bond giving each product. The system closely resembles MMO and its close relative hemerythrin in the aspects of reaction phenomena, EPR characteristics and product distributions. The Mn_2 analog cmplex、Fe-Zn hetero     

Bioinspired polymer functionalized with a diiron carbonyl model complex and its assembly onto the surface of a gold electrode via “click” chemistry

A complex pendant with two ethynyl groups, [Fe₂(μ‐SCH₂CCH)₂(CO)₆] ( 2 ), as a model of the diiron subunit of [FeFe]‐hydrogenase was polymerized and the {Fe₂(CO)₆} core was successfully incorporated into the polymer matrix. The polymer was characterized by a variety of spectroscopic techniques, TGA, FTIR, SEM, TEM, and NMR. The resultant polymer was immobilized via “click” chemistry using its terminal C?CH bond onto the surface of a gold electrode, which was premodified with azidothiol by self‐assembled monolayer (SAM). The assembled electrode showed electrochemical responses. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2410–2417, 2010     

Facile synthesis of pH‐responsive glycopolypeptides with adjustable sugar density

Well‐defined pH‐responsive glycopolypeptides were prepared by polymer‐analogous aqueous amide coupling of d ‐glucosamine to poly(α,l ‐glutamic acid) (PGA) using the coupling agent 4‐(4,6‐dimethoxy‐1,3,5‐triazin‐2‐yl)‐4‐methylmorpholinium chloride (DMT‐MM) without any organic solvents, additives, or buffers. Degrees of substitution (DS) up to 80% can be achieved, and the DS is adjustable by the molar ratio of DMT‐MM to PGA repeating units. Successful glycosylation of both low MW and high MW PGA was confirmed by ¹H NMR and FTIR spectroscopy as well as by an enhanced solubility at low pH. CD spectroscopy revealed that glycosylated PGAs with a DS up to 0.63 are able to undergo a pH‐responsive and reversible helix‐coil transition. However, for polymers with higher DS no transition occurs. A comparison with PGAs functionalized with monoethanolamine showed that the low helicity at high DS is not a steric effect due to the bulky sugar moieties, but a solvation effect. Preliminary turbidimetric tests with the lectin Concanavalin A indicate a biological activity of these glycosylated polypeptides. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3925–3931     

Hierarchical structure in polymer‐based drug delivery systems as probed by calorimetric measurements

Thermoporosimetry (TPM), a differential scanning calorimetry technique that relies on the shift of transition temperatures caused by the confinement of liquids, was applied to elucidate the complex morphology of drug‐loaded polymeric microcapsules prepared by the emulsion solvent evaporation method. For the very first time, TPM has been applied simultaneously with two liquids as structural probes. It was found that Miglyol, which dissolves the selected drug (Ibuprofen), is confined inside vesicles having a mean radius of 26.3 nm, whereas water, which is the continuous phase, is trapped inside a swollen polymeric network of Eudragit with an average mesh radius of 1.7 nm. A proposed hierarchical structure is given, which predicts that Eudragit microcapsules are formed from a collection of inert oil vesicles partitioned by polymeric Eudragit membranes swollen by water. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1939–1945, 2010     

Biomimetic superhydrophobic UHMWPE/nanosilica films with different sticky behavior on several metals

A kind of organic–inorganic composite film with biomimetic superhydrophobic performance was prepared on several metals including steel, aluminum, and copper. The organic matrix was ultrahigh‐molecular‐weight polyethylene (UHMWPE), and the inorganic filler was nanosilica. Scanning electron microscope observation indicated addition of nanosilica greatly changed the topography of the UHMWPE film. Special convexities were formed on the surfaces of the composite films, which made the composite films rougher than that of pure UHMWPE film. The nanosilica randomly scattered on the surface of the convexities and formed hierarchical structure similar to that of some plant leaves with superhydrophobic characteristics. Interestingly, it was found that there were remarkable differences between the sliding angles (SA) of water droplet on the composite films on different metals although the contact angles (CA) of water droplet on these films were quite close. The CA on the composite films on steel was about 157°, and the SA was larger than 90°, which demonstrated obvious superhydrophobic and sticky characteristic. But to the films on aluminum and copper, the CAs on them were larger than 160° and the SAs were between 3° and 4°, which meant excellent superhydrophobic and roll‐off performance. Scanning electron microscope observation indicated that there were some micro‐orifices in the film on steel and these micro‐orifices were connected to some extent. It was believed that these micro‐orifices provided capillary force and restrained sliding of water droplet. A sticky model based on capillary mechanism was proposed. Copyright © 2017 John Wiley & Sons, Ltd.